Terasic Products

El Camino is a distributor for Terasic products. On these pages you will find an overview of available systems. Detailed and up-to-date technical descriptions can be found on the Terasic website.

Terasic products at a glance:
Stratix 10Stratix VStratix IV | Arria 10Cyclone VMAX 10

USB Blaster Download Cable

Compatible with Altera USB Blaster
Support JTAG Voltage: 2.5V ~ 3.3V
Better anti-noise capabilities
The same circuit is used in Altera DE2 Board designed/manufactured by Terasic

Stratix 10

DE10-Pro

  • Intel Stratix 10 GX/SX FPGA
  • Four QSFP28 connectors and one PCI Express (PCIe) x16 edge connector
  • Four independent DDR4 SODIMM sockets (work with DDR4/QDR-II+/QDR-IV)

Stratix V

TR5 FPGA Entwicklungskit

  • Stratix V GX 5SGXEA7N2F45C2N
  • DDR3 SO-DIMM and FMC x4 Connectors
  • Large ASIC Prototyping Applications

TR5-F40W

  • Altera Stratix® V GX FPGA (5SGXEA3K2F40C3)
  • On-Board USB Blaster II or JTAG header for FPGA programming
  • Fast passive parallel (FPPx32) configuration via MAX II CPLD and flash memory
  • SSRAM, FLASH

TR5-Lite

  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • Two SFP+ connectors, One Serial ATA (SATA II) host port
  • DDR3 SDRAM, ISSI, FLASH

DE5-Net FPGA Development Kit

  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • 32MB SRAM (ISSI QUADP for DE5-Net 450,  GSI SigmaQuad-II+ for DE5-Net 550, Cypress QDRII+ for DE5-Net 500)
  • Up to 8GB DDR3 800 MHz SO-DIMM SDRAM

Stratix IV

Terasic TR4 FPGA Development Kit

  • Stratix IV GX EP4SGX230/EP4SGX530 with High Speed Transceivers
  • 2 PCIe x4 Connectors and DDR3 SO-DIMM Slot
  • Stackable Design for Multi-FPGA System

Arria 10

TR10a-LP QDRII+ Arria 10 FPGA Development Kit

  • Intel Arria 10 GX FPGA (10AX115N3F45E1)
  • Low Profile PCIe Gen3 x16 (Dual PCIe Gen3 x8) Board
  • Two QSFP+ Connectors
  • Five Independent 550MHz QDRII+ SRAMs

Heterogeneous Extensible Robot Open Platform

  • Built-in OpenVINO Toolkit
  • Intel Arria 10 GX FPGA (10AX115S2F45E1SG)
  • Intel Core™ i5/i7 Processor

HAN Pilot Platform

  • Arria 10 SoC with Dual-core ARM Cortex-A9
  • DDR4, HDMI, FMC, PCIe, SATA, Ethernet, Flash, USB, etc.
  • Type-C USB 3.1 Gen1 and DisplayPort Altenate Mode
  • Support Linux BSP

TR10a-HL2 Arria 10 FPGA Development Kit

  • Arria 10 GX FPGA (10AX115N3F45E1)
  • Half-length PCIe Gen3 x8 board
  • Four QSFP+ connectors 
  • Six independent 550MHz QDRII+ SRAMs

DE5a-Net-DDR4

  • Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR4 SODIMM socket and four independent 550MHz QDRII+ SRAMs

DE5a-Net Arria 10 FPGA Development Kit

  • Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR3 SODIMM socket and four independent 550MHz QDRII+ SRAMs

Cyclone V

OpenVINO Starter Kit Set

  • Bundled with Terasic OpenVINO Starter Kit and Intel IoT Dev. Kit (UP2)
  • Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
  • Ideal coding environment for OpenVINO developer as standalone system

Terasic SoC System on Module Evaluation KIT

  • SoC System on Module
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)

OpenVINO Starter Kit

  • Bundled with Terasic OpenVINO Starter Kit and Intel IoT Dev. Kit (UP2)
  • Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
  • Ideal coding environment for OpenVINO developer as standalone system

ADC-SoC

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • On-board two high speed A/D conveters
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

VEEK-MT2S

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
  • 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror

DE10-Standard

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
  • HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
  • Support Linux BSP and openCL BSP

VEEK-MT2-C5SoC

  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • 8-Megapixel Digital Image Sensor Module with auto focus
  • 7" LCD Touch Screen Module with 5 point touch
  • Accelerometer, Gyroscope, Magnetometer, Ambient Sensor

DE10-Nano Kit

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

DE0-Nano-SoC Kit/Atlas-SoC Kit

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

DE0-CV Board

  • Cyclone V 5CEBA4F23C7N Device
  • 4-bit Resistor VGA
  • Provides SPI and 4-bit SD mode for SD Card access
  • Serial Configuration device – EPCS64
  • 64MB SDRAM, x16 bits data bus
  • On-Board USB Blaster (Normal type B USB)

DE1-SoC-MTL2

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
  • Touch & LCD Spec

DE1-SoC Board

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

SoCKit - the Development Kit for New SoC Device

  • Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
  • 2GB DDR3, 128MB QSPI Flash, EPCQ256
  • SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC

Cyclone V GX Starter Kit

  • Cyclone V GX 5CGXFC5C6F27C7N  Device
  • LPDDR2, SRAM, FLASH EPCQ256
  • Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX

MAX 10

Max 10 Plus

  • MAX 10 10M50DAF484C6G with 50K LEs
  • DDR3 with ECC, QSPI Flash, MicroSD Socket
  • Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC

DE10-Lite Board

  • MAX 10 10M50DAF484C7G Device
  • Accelerometer and 4-bit Resistor VGA 
  • 64MB SDRAM, x16 bits data bus
  • Arduino UNO R3 and 2x20 GPIO connector
  • On-Board USB Blaster (Normal type B USB)

MAX 10 NEEK

  • MAX 10 10M50DAF484C6G with 50K LEs
  • DDR3 with ECC, QSPI Flash, MicroSD Card
  • Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC
  • 8-Mega pixel color camera and 7" 5-point touch screen