Terasic Produkte

El Camino ist ein autorisierter Distributor für Terasic Produkte. Auf unseren Seiten finden Sie einen Überblick zu den verfügbaren Systemen. Aktuelle und detaillierte Beschreibungen sind darüber hinaus auf der Website von Terasic zu finden.

Terasic Produkte im Überblick:
Stratix 10 | Stratix V | Stratix IV | Arria 10 | Cyclone V | MAX 10

USB Blaster Programmier-Kabel

Kompatibel mit Intel (Altera) USB Blaster
Unterstützte JTAG Spannungen: 2.5V ~ 3.3V
Bessere Störsicherheit und Signalqualität
Die gleiche Schaltung wie auf dem Altera DE2 Board, entwickelt und gefertigt von Terasic

Stratix 10

DE10-Pro

  • Intel Stratix 10 GX/SX FPGA
  • Vier QSFP28 Steckplätze und ein PCI Express (PCIe) x16 Steckverbinder
  • Vier unabhängige DDR4 SODIMM Sockel (verwendbar mit DDR4/QDR-II+/QDR

Stratix V

TR5 FPGA Entwicklungskit

  • Stratix V GX 5SGXEA7N2F45C2N
  • DDR3 SO-DIMM und FMC x4 Steckplätze
  • Für große ASIC Prototyping Anwendungen

TR5-F40W

  • Altera Stratix® V GX FPGA (5SGXEA3K2F40C3)
  • On-Board USB Blaster II or JTAG header for FPGA programming
  • Fast passive parallel (FPPx32) configuration via MAX II CPLD and flash memory
  • SSRAM, FLASH

TR5-Lite

  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • Two SFP+ connectors, One Serial ATA (SATA II) host port
  • DDR3 SDRAM, ISSI, FLASH

DE5-Net FPGA Development Kit

  • Altera Stratix® V GX FPGA (5SGXEA7N2F45C2)
  • 32MB SRAM (ISSI QUADP for DE5-Net 450,  GSI SigmaQuad-II+ for DE5-Net 550, Cypress QDRII+ for DE5-Net 500)
  • Up to 8GB DDR3 800 MHz SO-DIMM SDRAM

Stratix IV

Terasic TR4 FPGA Development Kit

  • Stratix IV GX EP4SGX230/EP4SGX530 with High Speed Transceivers
  • 2 PCIe x4 Connectors and DDR3 SO-DIMM Slot
  • Stackable Design for Multi-FPGA System

Arria 10

FLIK - FPGA Client Innovation Kit

  • Intel ® Arria 10 GX FPGA (10AX115N3F40E2SG)
  • Two Independent DDR4 x 64 banks, 4GB 1066MHz for each.
  • 1024Mb QSPI Flash
  • Thunderbolt 3 Port x1
  • PCIe Gen3x4 via Thunderbolt 3 Port
  • USB Blaster II port via Thunderbolt 3 Port

TR10a-LP QDRII+ Arria 10 FPGA Development Kit

  • Intel Arria 10 GX FPGA (10AX115N3F45E1)
  • Low Profile PCIe Gen3 x16 (Dual PCIe Gen3 x8) Board
  • Two QSFP+ Connectors
  • Five Independent 550MHz QDRII+ SRAMs

Heterogeneous Extensible Robot Open Platform

  • Built-in OpenVINO Toolkit
  • Intel Arria 10 GX FPGA (10AX115S2F45E1SG)
  • Intel Core™ i5/i7 Processor

HAN Pilot Platform

  • Arria 10 SoC with Dual-core ARM Cortex-A9
  • DDR4, HDMI, FMC, PCIe, SATA, Ethernet, Flash, USB, etc.
  • Type-C USB 3.1 Gen1 and DisplayPort Altenate Mode
  • Support Linux BSP

TR10a-HL2 Arria 10 FPGA Development Kit

  • Arria 10 GX FPGA (10AX115N3F45E1)
  • Half-length PCIe Gen3 x8 board
  • Four QSFP+ connectors 
  • Six independent 550MHz QDRII+ SRAMs

DE5a-Net-DDR4

  • Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR4 SODIMM socket and four independent 550MHz QDRII+ SRAMs

DE5a-Net Arria 10 FPGA Development Kit

  • Altera Arria 10 GX FPGA (10AX115N2F45E1SG)
  • Four QSFP+ connectors and one PCI Express (PCIe) x8 edge connector
  • Two independent DDR3 SODIMM socket and four independent 550MHz QDRII+ SRAMs

Cyclone V

OpenVINO Starter Kit Set

  • Bundled with Terasic OpenVINO Starter Kit and Intel IoT Dev. Kit (UP2)
  • Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
  • Ideal coding environment for OpenVINO developer as standalone system

Terasic SoC System on Module Evaluation KIT

  • SoC System on Module
  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)

OpenVINO Starter Kit

  • Bundled with Terasic OpenVINO Starter Kit and Intel IoT Dev. Kit (UP2)
  • Use FPGA as OpenVINO hardware acceleration engine and provide pre-compiled FPGA bitstream
  • Ideal coding environment for OpenVINO developer as standalone system

ADC-SoC

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • On-board two high speed A/D conveters
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

VEEK-MT2S

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and HSMC/GPIO Headers
  • 800x480 5-point touch, 8Mega Pixel Camera, 9-axis sensor and amblient light sensror

DE10-Standard

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • FPGA: SDRAM, VGA Out, Video-In, ADC Header, GPIO Header HSMC Headers
  • HPS: DDR3, USB Host, MicroSD Socket, Ethernet,  Accelerometer, UART-to-USB, LTC Header
  • Support Linux BSP and openCL BSP

VEEK-MT2-C5SoC

  • Cyclone V SX SoC—5CSXFC6D6F31C6N (SoC)
  • 8-Megapixel Digital Image Sensor Module with auto focus
  • 7" LCD Touch Screen Module with 5 point touch
  • Accelerometer, Gyroscope, Magnetometer, Ambient Sensor

DE10-Nano Kit

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), Full HD HDMI Output, UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit Ethernet and GPIO Headers

DE0-Nano-SoC Kit/Atlas-SoC Kit

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 SDRAM (32-bit data bus)(HPS)
  • Arduino Expansion Header (Uno R3 Compatibility), UART-to-USB, USB OTG Port, Micro SD Card Socket, Gigabit  Ethernet and GPIO Headers

DE0-CV Board

  • Cyclone V 5CEBA4F23C7N Device
  • 4-bit Resistor VGA
  • Provides SPI and 4-bit SD mode for SD Card access
  • Serial Configuration device – EPCS64
  • 64MB SDRAM, x16 bits data bus
  • On-Board USB Blaster (Normal type B USB)

DE1-SoC-MTL2

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
  • Touch & LCD Spec

DE1-SoC Board

  • Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
  • 1GB DDR3 and 64MB SDRAM
  • VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers

SoCKit - the Development Kit for New SoC Device

  • Cyclone V SX SoC with Dual-core ARM Cortex-A9 (HPS)
  • 2GB DDR3, 128MB QSPI Flash, EPCQ256
  • SD-card, USB OTG, LCD, Ethernet, UART to USB, Transceiver, HSMC

Cyclone V GX Starter Kit

  • Cyclone V GX 5CGXFC5C6F27C7N  Device
  • LPDDR2, SRAM, FLASH EPCQ256
  • Arduino Header, 2x20 GPIO Header, HSMC, UART to USB, HSMC, HDMI TX

MAX 10

Max 10 Plus

  • MAX 10 10M50DAF484C6G with 50K LEs
  • DDR3 with ECC, QSPI Flash, MicroSD Socket
  • Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC

DE10-Lite Board

  • MAX 10 10M50DAF484C7G Device
  • Accelerometer and 4-bit Resistor VGA 
  • 64MB SDRAM, x16 bits data bus
  • Arduino UNO R3 and 2x20 GPIO connector
  • On-Board USB Blaster (Normal type B USB)

MAX 10 NEEK

  • MAX 10 10M50DAF484C6G with 50K LEs
  • DDR3 with ECC, QSPI Flash, MicroSD Card
  • Ethernet, Audio codec, HDMI RX, Acceleromter, ADC, DAC
  • 8-Mega pixel color camera and 7" 5-point touch screen